Home                     About Us                   Sales Policy

                                                

LONG WATER PUMP SERPENTINE

Our Serpentine system was designed for the small block Chevy with a reverse rotation LONG water pump. G.M. part number 88894005. These pumps were used on 1989 - 93 caprice cars and 1988 - 95 trucks as well as a few other applications. System also requires the use of factory Chevrolet steel pulleys.
Street Rod (1969 - 86 Heads)
Bolts to the head and top water pump bolt holes. The alternator bracket will fit all 1969 and newer heads. The A.C. compressor bracket fits all G.M. aluminum heads and may be used on 1969 thru 1986 cast iron heads by drilling and tapping one hole for the upper mounting point. Will clear up to 3 3/4 in. tall valve covers when used on 1986 and earlier heads. 

Bracket Dimensions

Bracket Requirements

 Part# Price
305 - A.C. & Alt. 228.00
408L - P.S. 89.50


Street Rod (87 and Later Heads)
Bolts to the head and top water pump bolt holes. The alternator bracket will fit all 1969 and newer heads. Compressor bracket is designed to be used with 1987 and newer cast iron heads including the popular Vortec. Will clear up to 3 in. tall valve covers

Bracket Dimensions

Bracket Requirements

 Part# Price
306 - A.C. & Alt. 228.00
408L - P.S. 89.50


Low Profile (1969-86 Heads)
Designed for cars with low hood clearance and wide engine compartments -- trucks, 50-60's cars, even Vettes and Camaros. These brackets bolt to the head and top water pump bolt holes. The alternator bracket will fit all 1969 and newer heads. The A.C. compressor bracket fits all G.M. aluminum heads and may be used on 1969 thru 1986 cast iron heads by drilling and tapping one hole for the upper mounting point. Bracket comes complete with idler assembly.

Bracket Dimensions

Bracket Requirements

 Part# Price
307 - A.C. & Alt. 330.00
408L - P.S. 89.50


Low Profile (87 and Later Heads)
Designed for cars with low hood clearance and wide engine compartments -- trucks, 50-60's cars, even Vettes and Camaros. These brackets bolt to the head and top water pump bolt holes. The alternator bracket will fit all 1969 and newer heads. The compressor bracket is designed to be used with 1987 and later cast iron heads including the popular Vortec. Bracket comes complete with idler assembly.

Bracket Dimensions

Bracket Requirements

 Part# Price
308 - A.C. & Alt. 330.50
408L - P.S. 89.50


Power Steering
Power steering bracket for our long water pump serpentine kits above. Uses attached reservoir Saginaw power steering pump used on Chevrolet applications from 1975-78.

Bracket Dimensions

Bracket Requirements

 Part# Price
408L 89.50





Back to Top
Alan Grove Components, Inc.
27070 Metcalf Rd.
Louisburg, KS. 66053
Phone:913-837-4368 Fax:913-837-5721