|
Flathead
Ford
 |
Early
Wide Belt
This bracket is designed for the Ford/Merc. 1937-48 car and 1937-47
truck motors running the 5/8" wide belt. Bracket mounts the
Sanden A.C. compressor and GM standard case alternator off of the
original generator mounting flange. Set-up may be used with some
"regular" dual intakes, four barrel and stock intakes
(Will not fit triple carb). A 3/4" wide single groove clutch
assembly for the A.C. compressor and a wide groove alternator pulley
will also be required for the 5/8" wide belt. Will retain stock
fan assembly.
Water Pump Dimensions
Bracket Requirements
|
Part#
|
Price |
| 312
- A.C. & Alt. |
250.00 |
|
 |
Late
Wide Belt
This bracket is designed for the Ford/Merc. 1949 car and 1948-53
truck motors running the 5/8" wide belt. Bracket mounts the
Sanden A.C. compressor and GM standard case alternator off of
the original generator mounting flange. Set-up may be used with
all "regular" dual intakes, four barrel and stock intakes
(may not fit triple carb). A 3/4" wide single groove clutch
assembly for the A.C. compressor and a wide groove alternator
pulley will also be required for the 5/8" wide belt. Set-up
will also require off-set waternecks to provide radiator hose
clearance. Will retain stock fan assembly.
Water Pump Dimensions
Bracket Requirements
|
Part#
|
Price |
| 313
- A.C. & Alt. |
250.00 |
|
 |
Late
Narrow Belt
This bracket is designed for the Ford/Merc. 1950-53 car motors
running the narrow 3/8" belt. Bracket mounts the Sanden A.C.
compressor and GM standard case alternator off of the original
generator mounting flange. Set-up may be used with all "regular"
dual intakes, four barrel and stock intakes (may not fit triple
carb). Set-up will require off-set waternecks to provide radiator
host. Will retain stock fan assembly.
Water Pump Dimensions
Bracket Requirements
|
Part#
|
Price |
| 314
- A.C. & Alt. |
250.00 |
|
 |
Early
Wide Belt
Designed for 1937-48 Ford/Merc Car and 1937-47 Truck. Mounts GM
Alternator to stock generator mounting flange. Requires the use
of a wide alternator pulley for 5/8" belt.
Unlike
other aftermarket brackets these line up for correct pulley alignment.
Water Pump Dimensions
Bracket Requirements
|
Part#
|
Price |
| 241
- Alt. |
89.50 |
|
|
Late
Wide Belt
Designed for 1949 Ford/Merc Car and 1948-53 Truck. Mounts GM Alternator
to stock generator mounting flange. Requires the use of a wide
alternator pulley for 5/8" belt.
Unlike other aftermarket brackets these line up for correct pulley
alignment.
Water Pump Dimensions
Bracket Requirements
|
Part#
|
Price |
| 242
- Alt. |
89.50 |
|
|
Late
Narrow Belt
Designed for 1950-53 Ford/Merc Car. Mounts GM Alternator to stock
generator mounting flange. Uses standard GM alternator pulley
for 3/8" belt. Unlike other aftermarket brackets these line
up for correct pulley alignment.
Water Pump Dimensions
Bracket Requirements
|
Part#
|
Price |
| 243
- Alt. |
89.50 |
|
Alan Grove Components, Inc.
27070 Metcalf Rd.
Louisburg, KS. 66053
Phone:913-837-4368 Fax:913-837-5721
|
